Wiring New Construction and Additions

PSC, LLC in Auburn, AL, wiring a new home or addition requires strict adherence to electrical safety standards and the observation of national and local building codes.

The codes are in place because the risk of electrical fire from faulty wiring is high.

The steps involved include developing a wiring diagram that shows the location of the breaker box and the path of the wires to each outlet.

Considerations include:

• Number of outlets and switches to install.

• Number of circuits required. (Normally, 6 outlets per 110-voltage circuit for living areas and as few as 2 for kitchen areas.)

• Distance between each outlet. (Normally, 6’ between outlets)

The installation often requires drilling holes in studs to accommodate the wires between the walls.

If a new breaker box is required, it is important to choose the correct amperage. The size is determined by the needs of the space. Normally, 200 amps. Breaker boxes are installed where they can easily be accessed.

Certain appliances in the home require a 220-volt outlet. These include dryers, refrigerators, microwave ovens, ovens, and furnaces.

Other considerations for wiring new construction or additions include running wires and cables for televisions, internet service, or phones. If these services are not in place, prewiring for what may be required in the future is advised. This will save you from damaging or removing walls.

We are fully licensed and insured:

  • Estimates and Warranty
  • Job Clean-up
  • Satisfaction Guarantee
  • Quality Workmanship
  • Up Front Pricing
  • Friendly, Courteous, and Dependable Service

Does your new home need a brand-new electrical wiring system? Read our complete guide to home electrical wiring.

A staggering 211,310 actual fires — that’s how many occurred in Auburn and Opelika Alabama. That puts the count at one fire occurring every 12 minutes. Cooking remains the most common cause of house fires in the state. However, many others were a result of errant electricity. Older homes are at a higher risk of electrical fires, as they may still be using the original wiring system.

If your home is one of these, it’s time to upgrade your residential electrical wiring. If you’re building a new home in Auburn and Opelika Alabama, you should also learn about wiring requirements. This way, you can ensure that your installation meets building codes. More importantly, it’ll ensure that your home is safe from electrical hazards.

Ready to learn more about wiring a house? Then be sure to keep reading!

When Do You Need New Residential Electrical Wiring?

New electrical wiring installations are a must for new construction homes and extensions. Adding a detached structure, such as a garage, also requires new or additional wiring.

You may also need a higher-amp circuit breaker if you’re planning a home addition. Today, the minimum circuit breaker amp rating for new homes in the US is 100 amps. Many older homes, however, only have 60-amp circuit breakers. What’s more, most modern appliances require at least a 200-amp panel.

If you’re replacing or adding new appliances, your home breaker may no longer be able to support them. You should consider upgrading your breaker so your electrical system can safely distribute all the electrical needs.

What About Updates or Upgrades?

Existing homes may already warrant rewiring or an electrical panel replacement. This is especially true for older homes that may have outdated wiring or still use fuse boxes.

Unsure if it’s time to update your residential electrical system? Check out the list below for the signs that you need rewiring or an electrical service panel upgrade.

1. Your Home’s Construction Took Place Before 1985

Over half of all occupied homes in the US are four decades old. If your home is one of these, or if it’s built before 1985, it likely has a Federal Pacific Electric panel. These panels were a big hit in homes built between 1960 and 1985.

Either way, you should get this replaced ASAP as millions of FPE panels are defective. According to experts, these faulty electrical panels may be the reason for up to 2,800 home fires. These malfunctioning devices fail to shut off automatically even when overloaded.

2. Flickering Lights

If this happens when you turn on a high-wattage appliance, it’s a sign that you need a panel upgrade. It means that the panel can’t meet your actual electricity demands. An example is when you turn on your electric water heater or your air conditioner.

The high-wattage appliance forces it to draw in more power than its capacity. As a result, it tries to compensate by temporarily shutting the supply to your lights first. In this case, have a licensed electrician perform an electrical inspection ASAP. This way, you can determine if your flickering lights are a result of an undersized panel. If so, then it’s best that you get your home’s electrical system upgraded.

3. An Increase in Circuit Breaker Trips

It’s a must for a circuit breaker to trip whenever it overloads. It’s a safety design that prevents excessive current from flooding your wires. If it trips often though, it means your electrical panel can no longer meet your energy demands.

Do Electrical Wiring Jobs Require an Electrical Permit?

In Auburn and Opelika Alabama, an electrical permit is a requirement for all new constructions. You also need to secure this permit if you plan to make electrical changes to an existing home.

You need to get this permit before you can even change or install new electrical wiring and devices. The same goes when running extra electrical wires, getting a new outlet, or setting up a new light fixture. Replacing fuse boxes with circuit breakers also requires this permit.